Numerical Analysis Method for Computer Color Match in Textile Dyeing 织物染色计算机配色的数值分析方法
The Numerical Analysis Method of Dead Loads Effect on Static Deformation of Beams 恒载效应对梁变形影响的数值分析法
In the general formula of numerical analysis method for dam stability, the reliability of safety evaluate for dam depends on the determination of natural earthquake influence coefficient. 在大坝稳定性数值分析方法的一般公式中,天然地震影响系数的确定,关系到大坝安全评价的可靠性。
Based on the theory of stability, a numerical analysis method of the membrane wrinkle is established, and the results are certified by experiments. 基于稳定性理论建立了薄膜褶皱的数值分析方法,通过实验的方法对分析结果进行了验证。
The Numerical Analysis Method of Maximum Subgrade Soil's Dry Density and Optimum Water Content 路基土最大干密度和最佳含水量的数值分析方法
Review of numerical analysis method for fluid-solid interaction of dam-reservoir system 坝库系统流固耦合数值分析方法简述
The numerical analysis method is used to study the ground movement laws caused by the ovalization variation in the cross section in the action of water and soil pressure of tunnel lining. 第一部分介绍了软土盾构隧道施工引起的地层位移和地表沉降的研究方法,包括经验方法、解析方法、整体有限元方法以及位移控制有限元法。
At present, there is only numerical analysis method through iteration to get the bond failure load, but it's time consuming. 目前只有通过数值法反复试算,但计算工作量较大。
The numerical analysis method for solving dynamics differential equations of gear systems 齿轮系统动力学微分方程的数值分析方法
Each kind of numerical analysis method in geotechnical engineering has its advantages and limitations. 岩土工程中常用的数值分析方法各有其优越性和局限性。
The main techniques for investigating rock mass include experimental method and numerical analysis method. 研究岩体的方法主要有两种:试验方法和数值计算方法。
The finite element method is a very effective numerical analysis method to extremely complex engineering structure. 有限元法是分析复杂工程结构的一种非常有效的数值分析方法。
Meshless method is a type of new numerical analysis method, and an important complement and development of finite element method. 无单元法(也称无网格方法)是一种新兴的数值计算方法,它是有限元等传统数值分析方法的重要补充和发展。
Boundary Element Method ( BEM) is a new numerical analysis method presented recently by C. A. Brebbia et. 边界元法(BEM)是近年来提出的一种数值分析方法,它由Brebbia等人系统总结并应用于弹性力学等问题中。
This paper introduces the numerical analysis method of discontinuous rock to make the super finite element method. 本文论述了利用超级元法对不连续岩体进行数值分析的方法。
Present paper describes basic theory numerical analysis method for coupled chemo-mechanical behavior of biological soft tissue. 本文描述生物软组织的化学-力学耦合行为的基本理论和数值分析方法。
In this work numerical analysis method was applied to study the airflow and micro-particle movement and deposition. 为了揭示在人体上呼吸道中气流和微细颗粒的运动沉积规律,采用数值分析方法进行了研究。
The numerical analysis method has been used to systematically study descriptive adjectives from sound, grammatical and pragmatic aspects. 本文采用了数据统计分析的方法,从语音、语法和语用等方面对状态形容词进行了系统的研究。
The filed numerical analysis method of import parameters is presented, and the result of ANSYS is given also. 提出了电机中重要参数的有限元求解方法,并给出了有限元分析的结果。
The state of art of the contact problem and the numerical analysis method are summarized, too. 综述了接触问题研究发展现状及求解接触问题的数值分析方法。
The study provides effective numerical analysis method and theoretical basis for the design and optimization of automobile semi axle cross wedge rolling. 研究结果为优化和设计汽车半轴楔横轧设备提供了有效的数值分析方法和理论依据。
The research in this paper adopts the finite element numerical analysis method. 研究主要采用的是有限元数值分析的方法。
The characteristics of vibration are analyzed by Runge-kutta numerical analysis method. 采用龙格-库塔数值分析方法,针对拉索进行参数振动分析,研究其振动特性。
Using the finite element numerical analysis method to analyze the mining station is without invert and under different construction methods of mechanical behavior, according to the calculation results to choose the invert construction method. 用有限元数值分析方法计算分析了该暗挖车站是有无仰拱和不同施工方法下的力学行为,根据计算结果选择了仰拱的施工方法。
Fatigue life of crusher spindle is solved by numerical analysis method, by comparing the numerical results to fatigue simulation results, the accuracy of simulation analysis results and the remanufacturability are verified. 应用数值分析方法求解破碎机主轴的疲劳寿命,并将计算结果和疲劳仿真分析的结果进行对比,从而验证了仿真分析结果的准确性和再制造性。
This paper calculated the structure performance of underground cave dwellings using the numerical analysis method. 针对地坑窑结构的特殊性,本文采用数值分析的方法进行计算。
The most commonly used numerical analysis method includes the finite difference method and finite element method. 最常用的数值分析方法主要包括有限差分法和有限元法。
Researching on the numerical analysis method of dynamic interaction between dam and reservoir water-solid coupling. 主要工作如下:1.研究了坝体和库水流固耦合动力相互作用的数值分析方法。
The main research contents and results are as follows: ( 1) The numerical analysis method of in-service rig derrick with damage was studied. 本文针对在役钻机井架使用安全性评价中涉及到的关键科学与技术问题进行了系统研究,主要研究内容和成果如下:(1)对有损伤在役钻机井架数值分析方法进行了研究。
After the final model validation, drawn numerical analysis method used in this research has good accuracy. 3. 最后经过模型验证,得出本文采用的数值分析方法,具有较好的精度。